Peripheral Hp Balloon Catheter suppliers
Posté : ven. 25 oct. 2019 06:29
Medical High Pressure PTA Balloon Catheter
Medical High Pressure PTA Balloon Catheter Portfolio delivers advanced crossability and remarkable versatility to treat routine or challenging lower extremity cases.
Medical High Pressure PTA Balloon Catheter Features:
- High performance balloon material
- Puncture and abrasion resistant.
- Controlled compliance for accurate balloon vessel sizing.
- Rigorous fatigue testing assures consistent quality.
- Flexible, tapered tip
Combined with a low profile system leading to excellent trackability when crossing tighter lesions.
Tapering process assures consistently smooth insertion and atraumatic navigation.
- Outstanding delivery
Through a 6F sheath introducer
Strong pushability and best kink resistance, combined with excellent flexibility
- Superb Trackability
Shaft materials enable most pushability and kink resistance, combined with excellent deliverability
Device description
A guide wire (0.014" 0.018" 0.035") is recommended for use with the Balloon Catheter (Balloon catheter specification refers to the attachment for detailed). The connector(s) at the end of hub provide two accuracy conical fittings with a 6% luer taper for securely fitted to other medical equipment.
The size of guide wire recommended, nominal balloon diameter and lengths are printed on the hub. The Compliance charts, nominal pressure, rated burst pressure and applicable maximum diameter of guide wire are on labels of every product. The device is intended for single use only.
STORAGE
Store at controlled room temperature (recommended with the relative humidity under 80% and temperature at 10-40℃. ) and in a dry place. Keep away from sunlight. Do not expose to organic solvents (e.g. alcohol), corrosive gas, ionizing radiation or ultraviolet light. Rotate inventory so that catheters are used prior to the expiration date on package label.
Quality Guarantee-Medical High Pressure PTA Balloon Catheter
Barty has established overall process quality management system to make sure that all risks in the product life cycle are controlled, including design, procurement, production, inspection and improvement, strictly abiding by ISO13485：2003, Appendix to the quality management specification for medical devices: sterile medical devices, Appendix to the quality management specification for medical devices: implantable medical device,MDD93/42/EEC, US.FDA QSR820 and The Pharmaceutical Administration Law of Japan. Peripheral Hp Balloon Catheter suppliers
website:http://www.vascularbarty.com/peripheral-vascular-intervention/peripheral-hp-balloon-catheter/
Medical High Pressure PTA Balloon Catheter Portfolio delivers advanced crossability and remarkable versatility to treat routine or challenging lower extremity cases.
Medical High Pressure PTA Balloon Catheter Features:
- High performance balloon material
- Puncture and abrasion resistant.
- Controlled compliance for accurate balloon vessel sizing.
- Rigorous fatigue testing assures consistent quality.
- Flexible, tapered tip
Combined with a low profile system leading to excellent trackability when crossing tighter lesions.
Tapering process assures consistently smooth insertion and atraumatic navigation.
- Outstanding delivery
Through a 6F sheath introducer
Strong pushability and best kink resistance, combined with excellent flexibility
- Superb Trackability
Shaft materials enable most pushability and kink resistance, combined with excellent deliverability
Device description
A guide wire (0.014" 0.018" 0.035") is recommended for use with the Balloon Catheter (Balloon catheter specification refers to the attachment for detailed). The connector(s) at the end of hub provide two accuracy conical fittings with a 6% luer taper for securely fitted to other medical equipment.
The size of guide wire recommended, nominal balloon diameter and lengths are printed on the hub. The Compliance charts, nominal pressure, rated burst pressure and applicable maximum diameter of guide wire are on labels of every product. The device is intended for single use only.
STORAGE
Store at controlled room temperature (recommended with the relative humidity under 80% and temperature at 10-40℃. ) and in a dry place. Keep away from sunlight. Do not expose to organic solvents (e.g. alcohol), corrosive gas, ionizing radiation or ultraviolet light. Rotate inventory so that catheters are used prior to the expiration date on package label.
Quality Guarantee-Medical High Pressure PTA Balloon Catheter
Barty has established overall process quality management system to make sure that all risks in the product life cycle are controlled, including design, procurement, production, inspection and improvement, strictly abiding by ISO13485：2003, Appendix to the quality management specification for medical devices: sterile medical devices, Appendix to the quality management specification for medical devices: implantable medical device,MDD93/42/EEC, US.FDA QSR820 and The Pharmaceutical Administration Law of Japan. Peripheral Hp Balloon Catheter suppliers
website:http://www.vascularbarty.com/peripheral-vascular-intervention/peripheral-hp-balloon-catheter/